Portrait

Unknown artist

Cylinder lawn mowers. Hand driven cylinder lawn mowers with cast wheels and wheel sides. The rock cylinder consists of four twisted sheet strips. The Resistance screwed in steel holder of cast iron that is also attached to the roller for height of cliff in turned wood. The handle consists of a 910 mm long rod 40x25 mm. screwed to two forged flat iron, which in turn is attached to the wheels inside. Up a Black Wooden Roll as a Handle, this Finish with a cast-like fittings. The clip cylinder is fitted with a spring-loaded lubrication cup on each the page. The outside of the wheels has two moulded marks. See “Signing, marking” 1 and 2 above. The inside of the left wheel has two injected numbers. See “Signing, marking” 3 and 4 above. The inside of the right wheel has two injected numbers. See “Signing, marking” 5 and 6 above. The cast steel holder has an embedded number on the left side resp. right side. See “Signing, marking” 7 and 8 above. The above height refers to without handle. Hand length: 1110 mm. Coming from Artur Hjortskull’s hardware store in Lidnäs Moheda sn. Inscribed the Main Catalogue 2007-01-11. Function: Hand-driven lawnmowers for mowing lawns